| |
Charges NiCd, NiMH, lithium and lead-acid cells!
Great for a huge variety of battery types (NiCd, NiMH, LiPo and Li-Ion, and lead-acid), and applications such as electric airplane and heli batteries, Tx and Rx batteries, car and boat batteries, field batteries, and more. Charge current is 7A and the custom LCD includes a blue backlight for easy viewing. T2 can handle LiPo packs with up to 5 cells in series. The input cord has installed banana plugs, and large attachable alligator clips are included. The modified programming dial is easier to control. And a slight programming change, plus a totally recreated instruction manual for ease of use and understanding.
Upgraded features from original Triton:
- Handles LiPo batteries with up to 5-cells in series.
- Maximum charge current is increased to 7 amps.
- The custom 32 character LCD now includes a blue back-light for easy viewing anytime.
- A new control dial, updated programming changes, and improved instructions for easier programming.
- Banana plugs on the input lead, and includes mating alligator clips for easy connection to input power sources.
Also includes these standard features:
- Precision peak detection with adjustable sensitivity for NiCd and NiMH batteries.
- "Constant current / constant voltage" charge method for LiPo/Ion and Pb batteries.
- Temperature monitoring option (GPMM3151 Thermal Probe required).
- Top-off charge feature fully charges NiMHs without overheating.
- 0-250mA adjustable trickle charge current (NiCd and NiMH only)
- 0.1-3.0A adjustable discharge current.
- Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and LiPo/Ion.
- Perform 1 to 10 cycles (NiCd/MH only).
- Recall data for 10 full cycles.
- Configure up to 10 batteries in memory for instant, easy recall and charger setup
- Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, and error messages.
- Audible sound cues aid in programming and notification of function changes.
- Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection.
- Built-in cooling fan, for better charge efficiency and extends life of charger.
- Small and lightweight, with a super-sturdy aluminum case for rugged durability.
Stock Number: GPMM3153
  |
 |
| A higher LiPo cell count, more charge current, easy-to-see glowing blue LCD, new programming dial and instructions, and optional banana plugs plus mating alligator clip input connectors make Triton2 an incredible value! |
| Input Voltage: |
11.0V – 15.0V DC |
| Input connections: |
banana plugs with mating alligator clips |
| Number of outputs: |
one |
| Battery types, # cells: |
1-24 NiCd/MH (1.2-28.0V)
1-5 LiPo or Li-Ion (3.6-18.5V)
6, 12, 24V Pb (2V per cell) |
| Fast charge current: |
0.1-7.0A linear NiCd/MH (0.1A step, 90W max)
1C rating for LiPo/Li-Ion (90W max) |
| Fast charge termination: |
“zero deltaV” peak detection NiCd/MH
“cc/cv” for Pb and Li-Ion/LiPo
* optional thermal cutoff for all battery types |
| Peak sensitivity: |
NiCd 5-20mV, NiMH 3-15mV |
| Peak delay at start: |
0-60 minutes |
| Trickle charge current: |
0-250mA (NiCd/MH only) |
| Fast charge safety timer: |
0-990 minutes |
| NiMH max. charge capacity: |
0-9900mAh |
| NiMH top off charge: |
0-1000mA |
| Thermal cutoff: |
*50-150°F (10-65°C) |
| Discharge current: |
0.1-3.0A |
| Discharge cutoff voltage: |
NiCd/MH 0.5-1.16V per cell
(0.9V/cell fixed during cycle)
Pb fixed at 1.8V per cell
Li-Ion/LiPo fixed at 2.8V per cell |
| Cycle count: |
1-10 cycles (NiCd/MH only) |
| Cycle time delay: |
1-60 minutes |
| Battery memories: |
10 battery memories |
| Programming controls: |
modified jog dial, 2 pushbuttons |
| Display type: |
2 x 16 LCD with blue backlight |
| Displayed info: |
input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors |
| Audible indicators: |
10 melodies, on/off |
| Output connectors: |
banana jacks |
| Case material: |
extruded aluminum |
| Cooling system: |
built-in fan |
| Current overload: |
solid state |
| Case size: |
6.2 x 4.0 x 2.0 in (157 x 102 x 51mm) |
| Weight: |
16.4 oz. (466g) |
| * requires optional Thermal Probe (GPMM3151) |
 |
AMA Safety Recommendation
Copyright © 2006-2009 Hobbico, Inc. Privacy Statement | Terms of Use
All rights reserved. Do not duplicate or distribute in any form.
|
|
