This item is discontinued.
Please see our airplanes index for a list of current products.

Quiet electric operation — "shout-out-loud" performance!

With clean, quiet electric flight, swift airspeeds and sporty aerobatics, the ElectroStreak is a super performer for daredevil pilots. And thanks to ARF construction, it goes from the bench to the flying field in just 8-10 hours — with modern touches such as a fiberglass fuse, and included accessories like a motor, folding prop and electronic speed control. The ElectroStreak ARF: it's the perfect model for expanding your flying skills without expending a lot of assembly time!

The wings and tail section are factory-assembled and precovered in genuine Top Flite MonoKote film.
The pull/pull rudder linkage saves space and weight compared to conventional pushrod operation, and offers more efficient power transfer with less slop.
Includes clevises, control horns and other quality Great Planes hardware.

Not only is the hand-laid, gel-coated fiberglass fuselage lightweight, it also has a rounder, more aerodynamic shape than the squared-off balsa fuselage found in the kit.

Here's a great example of the ElectroStreak ARF's exceptional value: a 550 motor, spinner, 8x5 folding prop and electronic speed control with BEC are included.

"The all-balsa ElectroStreak kit has thrilled sport pilots for years with its airspeeds and aerobatics, and this ARF version takes it to new heights! It retains the best features of the original, adds upgrades such as a fiberglass fuselage — and features lots of preassembly that will get anxious modelers out and flying in a fraction of the time."

Don Anderson
President & Founder
Great Planes Model Manufacturing

Download wallpaper for your computer

The ElectroStreak ARF can reach remarkable speeds, and is capable of extreme aerobatics.

Click here for a review by The E Zone

Download the manual (412k PDF)

Important Tech Note

How to Tighten Covering on ARF Models (102k PDF)

SPECIFICATIONS
Stock Number: GPMA1055
Wing Span:44.5 in (1130 mm)
Wing Area: 342 in² (22 dm²)
Wing Loading: 18.1 oz/ft² (55 g/dm²)
Weight: 43 oz (1220 g)
Length: 39.5 in (1005 mm)
Requires: 4-channel radio with 3 micro servos, battery, charger

Recommended Accessories
Included 550 motor, 8x5 plastic folding prop, 1-1/2" spinner, ESC, misc. hardware	Radio FUTJ49** (4VF FM) see note below	Receiver GPML0044 (4-ch fm lo), GPML0045 (4-ch fm hi), GPML0056 (4-ch fm lo), GPML0057 (4-ch fm hi), FUTL0442 (4-ch fm lo), FUTL0443 (4-ch fm hi)
Crystal FUTL62 (LOW) FUTL63 (HI)	Servo Requires three FUTM0033 (S3101), TOWM4505 (TS-10), HCAM0110 (CS-12) or Micro servo FUTM0041 (S3106), HCAM0090 (CS-5), TOWM4510 (TS-5)		Motor Included
Gearbox/Ratio direct drive None	ESC Included	Battery GPMP0351 (4/5SC 2000)	Motor Pack None
Prop Included		Charger GPMM3000 (DC Peak), GPMM3153 (Triton2), GPMM3001 (Peak 400 DC)

Note: Some models require a 3-channel radio system, but a 4-channel will also work and it's beneficial because the modeler can use it in a wider range of applications with larger aircraft in the future. It depends on whether the modeler plans on using their radio for different uses other than just this airplane. Also please note that some radios come with receiver, crystal and/or servos.