| |
Great for small, lightweight, high performance airplanes!
 The BL-8 Brushless ESC is ideal for flat-foams to built-up 3Ds which are powered with brushless motors. Good for all types of brushless motors including out-runner style motors which are capable of handling 8 amps of continuous current. A custom BEC circuit can handle up to 4 or 5 servos.
- Fully proportional forward with brake.
- Very smooth throttle response.
- Custom BEC circuit handles up to 1.5A great for models requiring up to three high powered servos.
- Li-Po compatible, as well as NiCd and NiMH batteries.
- Includes over-temperature protection
- Includes pre-installed universal radio connector, micro battery connector, and 2 mm female bullet connectors for the motor.
- Other programmable features include brake control, safe-start, switching frequency, low-voltage control, timing and reversible rotation option.
Programmable, affordable and complete with governor!
 It's great for any 3D electric and brushless motor and any current load up to 12A. But turn on the governor and match it to ElectriFly's V-Pitch Prop System, and it's a ticket to a new world of previously impossible 3D stunts. Sudden, mid-air stops – abrupt, 180° direction changes – slow-motion downlines – and improbably fast, powerful climbs – the BL-12 makes them all possible with any flat foamy up to 12 oz., including ElectriFly FlatOuts!
It can be adjusted for use with LiPo, NiCd or NiMH batteries and programmed for seven other key performance factors. A custom BEC handles up to 1.5A (enough for three high-powered servos) and installed connectors make quick installation a breeze.
- Fully proportional forward with brake.
- Very smooth throttle response.
- LiPo compatible, as well as NiCd and NiMH batteries.
- Includes over-temperature protection
- Includes pre-installed universal radio connector, micro battery connector, and 2mm female bullet connectors for the motor.
- Other programmable features include brake control, safe-start, switching frequency, low-voltage control, timing and reversible rotation option.
| BL Series Brushless ESCs |
| ESC |
ESC Part # |
NiMH Cells |
LiPo Cells |
Cont. Current (A) |
Surge Current (A) |
BEC Current (A) |
Battery Cut Off (V) |
Battery Connector |
Motor Connector |
Governor |
Brake |
| BL-8 |
GPMM2070 |
5-10 |
2-3 |
8 |
9 |
1.5 |
programmable |
Deans Micro |
2 mm |
yes |
yes |
| BL-12 |
GPMM2075 |
5-10 |
2-3 |
12 |
15 |
1.5 |
programmable |
Deans Micro |
2 mm |
yes |
yes |
Copyright © 2005-2008 Hobbico, Inc. Privacy Statement | Terms of Use
All rights reserved. Do not duplicate or distribute in any form.
|
|
