The tried and true Stik — now as an easy electric!

For many years the Stik design has been a staple at the flying field, and now ElectriFly has equipped it with clean, quiet electric power! Glow pilots considering an electric aircraft will find familiarity in the ElectroStik’s quality wood construction and traditional look. Modelers who enjoy the advantages of brushless motors have the opportunity to experience flying an R/C classic. And everyone will appreciate how easy it is to get to the flight line — especially with the Receiver-Ready (Rx-R) version!

• It’s an entirely new take on the classic "Stik" design that has been a favorite among R/C pilots for years!
• All flight surfaces are prehinged with control horns mounted to shorten assembly time and ensure perfect alignment.
• Flight-ready after just one hour of simple assembly — with no gluing!
• Rx-R version comes with a quality ElectriFly brushless power system and three ES80 micro servos — just add a receiver and battery.
• Available as a Rx-R or an ARF! .

An Rx-R is more than an ARF – it's a new level of pilot ease! The on-board gear below is included and installed. Add a receiver and battery – and you're ready to fly!
ElectriFly RimFire 42-40-1000 Outrunner Brushless Motor An extremely high power-to-weight ratio makes this the ideal choice for the ElectroStik. Tightly wrapped windings push efficiency up to 77%. GPMG4675	ElectriFly SS45 Brushless ESC Hooks up in seconds, and delivers superbly smooth, precise response throughout the throttle range. Comes with Dean's® connectors. GPMM1840	ElectriFly ES80 Micro Servo Delivers exceptional torque and speed, and weighs only 0.6 ounces. GPMM1220

[ Click here for the Rx-R review by RC Universe ]

The main wing slides onto this lightweight carbon fiber tube and bolts together with just four screws and two straps – no messy epoxy!		The horizontal and vertical stabilizers simply bolt together, without measuring or gluing.
The included servos are quality ElectriFly ES80 micro servos, already installed so that all you have to do is plug in your receiver.* *Receiver shown is not included.		The recommended RimFire 42-40-1000 outrunner brushless motor delivers plentiful, dependable power.
Access to the roomy interior is quick and easy, allowing for convenient battery changes.		The wing attaches quickly with these two EZ Bolt thumb screws – no tools required!
With its 52.75" wingspan, the ElectroStik is ideally sized for both excellent performance and transportation ease.		With its low number of parts and high amount of prefabrication, your ElectroStik requires only an hour of final assembly.
SPECIFICATIONS GPMA1574/ARF; GPMA7500/Rx-R Wingspan: 52.75 in (1340 mm) Wing Area: 589 in² (38 dm²) Weight: 3-3.5 lb (1360-1587 g) Wing Loading: 11.7-13.6 oz/ft² (36-42 g/dm²) Length: 45.5 in (1155 mm) Both require: 4-channel radio, receiver, 11.1V 3200mAh LiPo battery, charger ARF also requires: 3 micro servos, outrunner brushless motor, 45A brushless ESC		View the video clip: 23.5MB, 13.3MB, 7.3MB Download the RxR manual (528 KB) Download the ARF manual (815 KB) Download the Product Flier (840 KB) Download wallpaper for your computer

Copyright © 2008-2010 Hobbico®, Inc. Privacy Statement | Terms of Use
All rights reserved. Do not duplicate or distribute in any form.